A 2016 Mercedes-Benz G550 was brought to Auto Werkstatt after the owner requested an engine replacement due to a knocking noise coming from the original engine. During the initial diagnosis, technicians discovered metal particles in the engine oil, indicating that internal engine components had sustained damage. With evidence of internal mechanical failure, replacing the engine became the recommended solution.
For this major repair, Auto Werkstatt sourced and installed a lower-mileage replacement engine. Rather than simply transferring the replacement engine into the vehicle, the technicians also renewed several important components during the installation. New spark plugs, gaskets, and seals were installed to support reliable operation and help prevent issues associated with reusing worn components.
The cooling and engine ventilation systems also received attention as part of the project. Technicians replaced the water pump and thermostat, along with the oil separators. Replacing these components while the engine was out provided an opportunity to address important supporting systems and reduce the likelihood of needing additional labor-intensive work shortly after the engine installation.
Following the engine replacement, the G550 received a multipoint inspection to evaluate its overall condition. The inspection found no fluid leaks or abnormalities under the hood, and all fluid levels were full and clean. All four tires measured approximately 11mm of tread, while the rear brakes had 8mm of pad life remaining. The front brake pads measured 6mm, although the rotors were heavily grooved, making the front brakes an item for future attention.
This Mercedes-Benz G550 project involved much more than addressing an engine noise. After finding metal contamination in the original engine oil, Auto Werkstatt completed a major engine replacement using a lower-mileage engine and renewed key components throughout the installation. The additional inspection gave the owner a clearer picture of the vehicle’s condition and documented the remaining maintenance items to monitor.
Case Study Details
Location
Service
Need similar work done?